Yarn Winders make knitting so much simpler.

Your Yarn stash will have never ever looked so tidy! Colourful Wool cakes all neat and structured.

There are many types of yarn ball winders on the market ᾿ simple hand managed ones, beautiful wooden winders plus electrical yarn ball winders.

There are various Yarn Winders to choose from, we've explored what's out there and made a few recommendations.

Every knitter needs a Wool winder.

We've read suggestions through top bloggers and sifted through 5 star reviews.

Here is a list of the best Yarn Winders we’ve discovered based on hours of researching online.

Why would you want a Yarn Winder?
Use it for Unwound Yarn
That can compare with worse than a horrible tangled clutter, when knitting directly from a skein or hank of yarn. A hank is a long shape, loosely twisted and many beautiful, expensive, hands spun or hand dyed yarns come in this shape. Yarn purchased from craft stores/online are typically bought from skeins. The best bit is that you could make center pull cakes so you don't have it rolling all over the place as you use it.

What is the difference between a ball and a cake then?
A golf ball is round and usually wound by hand. A cake is injury using a winder, has tubular form and two flat sides. A cake is created when winding wool with a winder.

Yarn cake
Should you have a yarn winder, it is very easy to wind yarns into cakes. The cake is a roll with two flat sides so it won’t move. The tail left in the middle of the yarn cake means it’s super easy to pull it out from the middle, with no usual scrambling for the end within the yarn ball and almost inevitable knot jumping out instead.

Uniform Tension
Many commercially wound yarns are extremely loose. This is great for storing, they can squish down but a well injury ball or hank will help with maintaining uniform tension throughout a sewing project.

Using a Yarn Winder is great for examining the Yarn for knot and imperfections and color changes.

When using a yarn winder, evaluating the yarn for thin or even weak points and knots will help determine where in the project each skein, hank or ball of wool should go. In some yarns color changes are important. Rewinding the yarn will help determine where and how to use the wool you have.

What to Look for in a Yarn Winder
Sturdy Construction:
When looking for a wool winder, look for something that is built to final. If there are plastic bits, get them to be not going to break right away.
Check the safety of the gears. If the yarn is likely to slip underneath the gears will eat your yarn up. In sturdy yarn winders, the gears are usually better protected.
The table grip should also be sturdy and have a good grip, preferably without damaging the area.

Easy Crank System:
You want something that can hold up to some serious quality. Whilst operating the crank it will feel smooth and have an even stress whilst not pulling on the yarn. It will want to feel sturdy and not like it is going to break off!

Ease of Setup:
For Yarn Ball Winder newbies you want something that doesn't need hrs, reading the manual on how to operate it. Quick, easy and simple is what you're looking for.

Steps To Setting Up Your Yarn Ball Winder
Some of you may choose to use a Yarn Swift to hold your skein or hank, with your yarn ball winder. Some people are quite happy to make use of the back of a dining room chair to hold yarn or a very loving and patient member of the family!!

Find a sturdy counter or table to set up your yarn winder and yarn swift. When the table will be marked with the clamps, add a cloth over the top for protection.

Experts report that the best distance to place between your yarn winder and yarn swift is 12 to eighteen inches. Use the clamps at the foundation of each piece of equipment to secure them to the particular table. Make sure the bolts are tightened.

How To Not Get In A Tangle Whenever Placing the Yarn on the Quick
- Gently unwind the hank or skein and remove the connections that kept the yarn together. If you work with scissors to do this, be very careful. You have to watch you are not cutting into the wool.
- Check for twists and guarantee the yarn is in a nice big loop.
- Find the two ends and make sure they are free from the skein.
: Most swifts are like an umbrella, hence the common name for these sewing devices (umbrella swift)
- A person push up the knob at the bottom of pole on the swift and as you need to do so the arms will spread out.
-- The spread of the arms from the swift need to ensure that your yarn loop fits snuggly around the outside of them. Some adjustment will be required here, depending on the size of the loop.

Following steps... Connecting the Yarn to the Ball Winder
- Find the end of the skein of yarn gowns on the outside. This will be the end that you connect with your yarn winder.
- Slip the end of the yarn through the steel yarn guide and into the slit at the top of the winder. This end will be where you access center draw from your yarn cake.

Creating Your own Center Pull Yarn Cake : Happy Days!
- Slowly turn the handle and the yarn golf ball winder will start to spin the yarn into a cake.
- Use your additional hand to gently guide the particular yarn between the yarn swift as well as the ball winder.
- Increase your swiftness a little more making sure that both winder and swift are moving freely.
: You'll have a yarn cake in no time!!

Getting rid of the Yarn Cake from the Winder
- The Yarn Swift will have no more yarn attached
- Just use your pincher fingers on one hand to hold the yarn that's in the slit at the top of the winder.
- Use your other hand to gently glide the yarn cake off the yarn winder.
- The end that you have inside your pincher fingers will be the center pull end.
- Unwind the a few feet of yarn from the outside and after that wrap around the middle a few times plus tuck in that end. This is just not bother you until you get to the conclusion of the yarn cake.
- Konstruera da!! A beautiful easy to use yarn dessert is now ready.

Happy Knitting